O w n e r O s M a n u a l
PlaybackNAllows automation playback enablenel stripOs SELECT button for 2 seconds, and
and bypass for the individual channels. This fea-then press the SELECT button under the Play-
ture is used in addition to the global automationback mode to toggle between the Disabled,
bypass, but works on a per channel basis. TherePunch-Run, and Run states.
are three modes within Playback: Run, Punch-Shortcuts: Note the Oprevious-click� shortcut
Run and Disabled.(the last click has a memory if it was on a Olike�
Note: The three different Playback modes, Dis-parameter). Also you can click and swipe down
abled, Punch-Run, and Playback, all operate inthe list to change the column to the value thatOs
the same manner for MIDI I/O as they do for auto-toggled by the click.
mation. Remember that MIDI I/O only pertains toNote: The Disabled state does not automati-
Fader, Mute, and Pan automation and control.cally reengage itself. Remember to toggle it to
Run: This is the default mode, and if dynamicPlayback status if you want automation moves to
automation is present on the channel, automationplay once again.
moves play back when time code is received andWriteNThis in an individual channel write-
the global automation bypass is disabled.safe function that is independent of the global
Disabled: This mode simply disables automa-Automation Bypass and Automation filters.
tion playback on the individual channel,There are two modes, Enabled and Locked,
regardless of the global Bypass status. ODisabled�where Enabled allows automation to be written
is a safe area that you can use to prevent automa-and Locked prohibits the overwriting of moves
tion playback from chasing and overwriting youron the channels dynamic automation track.
latest edits, before you get a chance to commit theNote: The two modes, Enabled and Locked,
settings. The ODisabled� feature is also handy foroperate in the same manner for MIDI I/O as they
setting up parameters within the context of a mix,do for automation. Remember that MIDI I/O only
relative to whether other individual channels orpertains to Fader, Mute, and Pan automation and
sections are automation bypassed or not.control.
Punch-Run: Once youOve automated a channel,Toggle the Write mode by clicking on the
you might want to pre-set a punch-in level to dropWrite column in the specific channelOs row. From
or boost the parameter of interest (especially athe console, hold down an individual channel
fader). In Absolute mode (Auto Touch off), the pa-stripOs SELECT button for 2 seconds, and then
rameter cannot be altered if it is chasingpress the SELECT button under the Write mode
automation, as you can see when you grab a faderin the Fat Channel Display to toggle between the
knob during automation playback and it Ofights�enabled and locked states.
you. For this purpose, we created the Punch-RunShortcuts: Note the Oprevious-click� shortcut
mode. Place the channel in Punch-Run, which re-(the last click has a memory if it was on a Olike�
leases the playback chase mechanism until theparameter). Also you can click and swipe down
channel has been placed in any automation Writethe list to change the column to the value thatOs
mode. When Punch-Run is engaged, you can rolltoggled by the click.
back the tape, freely adjust the parameter levelIsolateNDisplays the current solo isolate as-
and, when the punch-in point arrives to set thesignment and allows you to change the
new level, press the WRITE button on the chan-assignment.
nel and the parameter level will be written to theSolo isolate mode allows a channel to be
track. At punch-out, two things will occur: the pa-heard on the solo bus in the Control Room Out
rameter level jumps to any pre-existing level on(or on the main bus when MIXDOWN SOLO is
the track (similar to Write Flyback, but the levelactive) when another channel is soloed. For ex-
is not necessarily the original level) and the chan-ample, you could solo isolate an FX Return so
nel parameters now chase on subsequentthat when you solo a channel you hear its effect
playback.as well. A solo isolated channelOs SOLO LED
You cycle through the modes by clicking on theblinks to indicate that solo isolate mode is active.
Playback column in the specific channelOs row.
From the console, hold down an individual chan-
AD-35
Addendum |
ACEC
